The KA Electronics Input-Gain-Filter-Output, "MTC-IGFO," is a
Mastering Transfer Console front-end with Swiss Army Knife flexibility. This listing is for the bare PC board and ICs including 2 THAT1246, 2 THAT1646, 2 OPA2134PA and 4 NJM2114D.
What does the MTC-IGFO do?
The MTC-IGFO has a fully-balanced line receiver, individual Left/Right or
Stereo Mute, a -5.5 to +5.5 dB gain stage designed for 23 step switches, +5dB
gain boost, four relay-selected high or low pass filter stages (12dB/octave) and
balanced output for driving an insert chain.
Schematic.
Multiple IGFO boards can be
cascaded to add additional filters. The MTC-IGFO coupled with an
insert switcher create a high-quality transfer console at low cost.
Relay filter selection eliminates costly multi-pole switches.
Second-order filters require two switch poles per channel. A stereo transfer
console with stepped switches requires two 4 pole switches to control both the
high and low pass filters. A tape-to-vinyl transfer console, often requiring
identical modulation plus preview channels, requires 8 pole switches. The cost
of tuning a single pair of low and high pass filters by varying its component
values is high.
The MTC-IGFO uses a different approach with active filter
stages for each filter frequency. Costly rotary switches are replaced by
multiple active filter stages with their outputs switched by low-cost
double pole relays. A unique insert chain places only the selected filters in
the signal path. With the MTC-IGFO, a single pole rotary switch can tune several
channels.
Filters customized for your unique workflow.
Each MTC-IGFO board has four stereo filters which, according to assembly and jumper
placement, can be all high-pass, all low-pass or two high-pass and two low-pass. On-board jumpers allow the second two filters to be fed from the input or the
output of the first two filters for band-pass combinations of high and low-pass.
Multiple MTC-IGFO boards can be cascaded to expand the number of filters
available. Two boards provide eight filter frequencies in various combinations
of high and low-pass such as 4HP/4LP, 2HP/6LP, 6HP/2LP or 8 of all one type.
Multiple boards may be cascaded actively in single-ended or fully-balanced
configurations or passively to avoid additional circuitry.
Some examples high-pass filter frequencies are 20, 30, 40 and 50 Hz. Common low-pass
frequencies are 12, 14, 16, 18, 22 and 27 kHz. (Second-order 12 dB/octave
Q=0.707) The filters are unity-gain Sallen-Key topology with custom frequency or
Q set by the builder. Configuration of the filters to either low or high-pass
response are done by component placement during assembly. Example filter
configurations and component values are provided in the documentation.
Example 20/30 Hz high-pass and 22/27 kHz low-pass filter using a single MTC-IGFO.
20/30/40/50 Hz high-pass and 12/14/16/18 kHz filter for tape-to-vinyl transfer using two MTC-IGFO boards.
Balanced outputs drive the Insert Chain.
The MTC-IGFO has fully-balanced THAT1646 OutSmarts line drivers to feed the insert chain. When feeding cascaded boards the THAT1646
may be bypassed to provide unbalanced active or hard-wire connections to the
preceeding board's filters.
Flexible.
The MTC-IGFO has numerous jumpers to provide Swiss Army Knife features.
One set of jumpers bypasses the active inputs
and outputs to passively cascade boards. A second set of jumpers allows the last
two filters to receive their inputs from the first two rather than the input to
allow combinations of high and low pass.
An optional on-board relay
voltage regulator is available for unregulated or higher voltage supplies. Five
current-limited outputs are available for LED switch illumination of Filter On,
+5dB gain and Left/Right/Stereo Mute.
The KA-Electronics MTC-IGFO is sold as a bare PC board, a "kit" including
semiconductors, or an assembled and fully-tested module.
MTC-IGFO Assembly and Test Instructions, Schematics
pdf.
MTC-IGFO Build thread at the
Pro Audio design Forum.
A Mouser Electronics Project Manager
bill-of-materials
is available for DIY builds of the MTC-IGFO.
Mastering Transfer Console MTC-IGFO, Input, Gain, Filter, Output, Bare PC Board and ICs
- Brand: KA Electronics/Rockmore-Labs
- Product Code: MTC-IGFO-PCB-IC
- Availability: In Stock
-
$109.95